Lattice girder armagasa

NMX-B-455, NMX-B-253, NMX-B-072

Category:

Cold drawn steel

The reinforcement is an electro-welded product, used for the manufacture of semi-precast concrete beams, consisting of three longitudinal corrugated rods forming a triangular cross-section, the lower ones being electro-welded to the upper ones by plain wire lattice stirrups.

Rope
Upper
String
Lower
Zig-Zag
Measure Height (cm)
Steel area
bottom mm2
Diameter
inches (mm)
Diameter
inches (mm)
Diameter
(mm)
Presentation
10-36 10 36 1/4" (6.35) 3/16" (4.76) 4.11
Length from 6.0 to 9.0 m
(Other lengths available

)
12-36 12 36 1/4" (6.35) 3/16" (4.76) 4.11
14-36 14 36 1/4" (6.35) 3/16" (4.76) 4.11
19-36 19 36 1/4" (6.35) 3/16" (4.76) 4.11
10-64 10 64 1/4" (6.35) 1/4" (6.35) 4.11
12-64 12 64 1/4" (6.35) 1/4" (6.35) 4.11
14-64 14 64 1/4" (6.35) 1/4" (6.35) 4.11
19-64 19 64 1/4" (6.35) 1/4" (6.35) 4.11
21-64 21 64 1/4" (6.35) 1/4" (6.35) 4.11
14-99 14 99 5/16" (7.93) 5/16" (7.93) 4.11
19-99 19 99 5/16" (7.93) 5/16" (7.93) 4.11
21-99 21 99 5/16" (7.93) 5/16" (7.93) 4.11
24-99 24 99 5/16" (7.93) 5/16" (7.93) 4.11

These products earn the following LEED® credits thanks to regional, recycled material content

LEED v4:
- Prerequisite MRp: Construction and demolition waste management planning.

-Credit M12: - Construction Waste Management.
-Building Product disclosure:
- Material ingredients
- Sourcing of raw materials

CREDIT M12:
- MCr2: Construction Waste Management.
- MRc4: Recycled Content.
- MRc5: Regional Materials.