The rods manufactured by GRUPO ACERERO meet the highest quality standards, in accordance with national and international standards. NMX-B-506-CANACERO-2019, ASTM-A615M and ASTM-A706M.
We also manufacture special orders of products with different physical and chemical characteristics according to the requirements of our market (weldability, ductility, diameters and lengths).
Nominal dimensions NMX-B-506
Rod Designation No. | Measure | Diameter | Cross-sectional area | Nominal weight | |||
---|---|---|---|---|---|---|---|
in | mm | in2 | mm2 | lb/ft | kg/m | ||
3 | 3/8" | 0.375 | 9.5 | 0.11 | 71 | 0.376 | 0.560 |
4 | 1/2" | 0.500 | 12.7 | 0.20 | 127 | 0.668 | 0.994 |
5 | 5/8" | 0.625 | 15.9 | 0.31 | 198 | 1.043 | 1.552 |
6 | 3/4" | 0.750 | 19.1 | 0.44 | 285 | 1.502 | 2.235 |
8 | 1” | 1.000 | 25.4 | 0.79 | 507 | 2.670 | 3.973 |
10 | 1" 1/4 | 1.270 | 31.8 | 1.27 | 794 | 4.303 | 6.225 |
12 | 1" 1/2 | 1.500 | 38.1 | 1.76 | 1140 | 6.464 | 8.938 |
Mechanical properties NMX-B-506
No. Designation of rod |
Tensile strength tensile strength, min kg/cm3 |
Yield stress yield stress, min kg/cm3 |
Elongation at 200 mm, min, %, %, % at 200 mm, min, % at 200 mm, min, % at 200 mm, min |
---|---|---|---|
3, 4, 5, 6 | 6,300 kg/cm3 | 4,200 kg/cm3 | 9 |
8 | 8 | ||
10,12 | 7 |
Mechanical properties at bending NMX-B-506
No. Designation of rod |
Grade 60 (42) |
---|---|
3, 4, 5 | 3 1/2 d |
6, 8 | 5d |
10 | 6d |
12 | 8d |
Nominal dimensions ASTM A706/A706 M
Rod Designation No. | Measure | Diameter | Cross-sectional area | Nominal weight | |||
---|---|---|---|---|---|---|---|
in | mm | in2 | mm2 | lb/ft | kg/m | ||
4 | 1/2" | 0.500 | 12.7 | 0.20 | 127 | 0.668 | 0.994 |
5 | 5/8" | 0.625 | 15.9 | 0.31 | 199 | 1.043 | 1.552 |
6 | 3/4" | 0.750 | 19.1 | 0.44 | 284 | 1.502 | 2.235 |
8 | 1” | 1.000 | 25.4 | 0.79 | 510 | 2.670 | 3.973 |
10 | 1" 1/4 | 1.270 | 32.3 | 1.27 | 819 | 4.303 | 6.404 |
Mechanical properties ASTM A 706/A706 M
No. Designation of rod |
Resistance to tensile strength min, psi [Mpa]. |
Yield stress , min, psi [Mpa] |
Yield stress , max, psi [Mpa]. |
Elongation at 200 mm, min, %, %. |
---|---|---|---|---|
4, 5, 6 | 80 000 [550] | 60 000 [420] | 78 000 [540] | 14 |
8,10 | 12 |
Mechanical bending properties ASTM A 706/A706 M
No. Designation of rod |
Grade 60 (42) |
---|---|
4, 5 | 3d |
6, 8 | 4d |
10 | 6d |
Marking
a | MANUFACTURER'S IDENTIFICATION | GASA |
---|---|---|
b | NO. ROD DESIGNATION | 3,4,5,6,8,10,12 |
c |
DESIGNATION OF THE STANDARD (NMX-B-506-CANACERO-2019) |
N |
DESIGNATION OF THE STANDARD (ASTM Standard A-706) | W | |
DESIGNATION OF STANDARD (Standard /ASTM A-615) | S | |
DESIGNATION OF STANDARD (Standard ASTM A-706/ASTM A-615) | WS | |
d | ROD GRADE IDENTIFICATION | 42, 52, 60 |
e | Country of origin designation 'Mexico'. |
Straight and Bent Rod Presentation Specifications
Diameter (Inches) | Presentation | Length | Rods per tonne (depending on length) |
---|---|---|---|
3/8" | Folded | 12.0 m | 149 a 154 |
3/8" | Straight | 12.0 m | 149 a 154 |
3/8" | Straight | 9.00m | 199 a 207 |
3/8" | Straight | 9.15 m | 196 a 204 |
1/2" | Folded | 12.0 m | 84 a 86 |
1/2" | Straight | 12.0 m | 84 a 86 |
1/2" | Straight | 9.00m | 111 a 115 |
1/2" | Straight | 9.15.m | 110 a 113 |
5/8" | Straight | 12.0m | 53 a 55 |
3/4" | Straight | 12.0m | 37 a 38 |
1” | Straight | 12.0m | 21 |
1" 1/4 | Straight | 12.0m | 13 |
1" 1/2 | Straight | 12.0m | 9 |
NOTE: Cut to size according to customer requirements (special lengths). Different types of corrugation according to the needs of the end consumer.
Specifications of Presentation Rod in Rolls
No. Rod designation | Diameter mm | Weight kg | Internal Diameter m | External Diameter | Length m |
---|---|---|---|---|---|
3 | 9.5 | 2,400 kg approx. | 0.91 - 0.97 | 1.14 - 1.22 | 1.47 a 1.80 |
4 | 12.7 | ||||
5 | 15.9 |
These products earn the following LEED® credits thanks to regional, recycled material content
LEED v4:
- Prerequisite MRp: Construction and demolition waste management planning.
-Credit M12: - Construction Waste Management.
-Building Product disclosure:
- Material ingredients
- Sourcing of raw materials
CREDIT M12:
- MCr2: Construction Waste Management.
- MRc4: Recycled Content.
- MRc5: Regional Materials.